AC3 Digital decoders

Posted by Robert W [IP: 208.8.145.241] on November 30, 1998 at 23:07:30:

In Reply to: AC3 Digital decoders posted by mbrolph on November 30, 1998 at 21:10:54:

For this to work you need pre-outs and Main-ins only if you have a receiver, not a pre-amp. If you are currently running three separate amps then this will hook up just fine. The nice thing about the 9es is it has a bypass mode that lets all the signals bypass the 9es so your system will work as it does now for music etc. But when you want to listen to a 5.1 signal then it will be your pre-amp and it has its own control over your amps with its own remote. It will work with any seperates and with any receiver that has pre-outs and main ins. (as long as you have at least 5 channels of amplification)
I hope this will help
LTR R

Follow Ups:

Return to the new SMR Forums Menu

Design & HTML © SMR Home Theatre, Images © SMR Home Theatre cannot be reproduced without permission.  The images on this page are digitally watermarked.  New forum messages should be posted into SMR Forums v2 - http://www.smr-forums.com/

	The Web   SMR Archive