Modulating: Trouble with Digital inputs

Posted by Dustin Smith [IP: 63.14.40.74] on July 22, 1999 at 13:22:18
Using Mozilla/4.0 (compatible; MSIE 5.0; Windows 98; DigExt):

In Reply to: Modulating: Trouble with Digital inputs posted by Nigel Pond [SysOp] on July 22, 1999 at 09:17:59

Nigel, thanks for the suggestion.
My Audio/Video installer and I think we have solved this. Yes, it turns out that if I use the analog outs on the components then I will be able to output the analog signals to Tape 1/MD.

Currently, we have the analog audio outs from the components (DVD, DSS)connected to the inputs of a Channel Plus 5435 3-channel digital modulator. Digital outs are being run from the components to the digital in's on the DSP-A1. The audio is coming out fine thru the CATV coax (because we are running the analog out's to the Channel Plus). However, we need the ability to connect Tape 1/MD to an external Amp (to pass analog signals from these components), which will be amplifying the in wall speakers in multiple rooms. However, since the analog outs from the components are currently connected to the Channel Plus, we can't run them to the analog in's on the DSP-A1, making it impossible to channel the analog signals out of Tape 1/MD thus to the external amplifier.

My installer is suggesting that there is another Channel Plus modulator that makes it possible to feed the analog signals out so we have something to connect to the analog in's on the DSP-A1. Then we will have the ability to send those signals out of Tape1/MD.

Hopefully, this will solve the problem. I don't know too much about modulating, but this guy apparently does.

Follow Ups:

Return to the new SMR Forums Menu

Design & HTML © SMR Home Theatre, Images © SMR Home Theatre cannot be reproduced without permission.  The images on this page are digitally watermarked.  New forum messages should be posted into SMR Forums v2 - http://www.smr-forums.com/

	The Web   SMR Archive