svhs Splitters

Posted by Ken Simmons [IP: 208.8.214.8] on April 07, 1999 at 07:48:26
Using Mozilla/4.51 [en] (Win95; U):

In Reply to: svhs Splitters posted by Ira B on April 06, 1999 at 22:08:30:

They're NOT CHEAP - looking at, if I remember right, a $100 STARTING PRICE for S-video switcher/splitters.

If that's a little steep, go to yuor library and check-out the following "Electronics Now" issue:

* July 1998: 1:4 S-video "splitter" project (pg. 31)

I remember this project: "active" in design, fairly easy to build, and not very expensive in terms of parts. You might also want to get this issue too:

* Sept. 1998: pg. 12 - a letter about the above project (a correction? I don't remember...)

Of course, the project article assumes you "know your way around" a soldering iron, electric drill (for holes) and possibly a "hobby" knife. ;)

Hope this helps a little? :)

Ken

Follow Ups:

Return to the new SMR Forums Menu

Design & HTML © SMR Home Theatre, Images © SMR Home Theatre cannot be reproduced without permission.  The images on this page are digitally watermarked.  New forum messages should be posted into SMR Forums v2 - http://www.smr-forums.com/

	The Web   SMR Archive