Re: Speaker plugs and wall mounts

Posted by Brad Broten [IP: 209.82.120.19] on May 17, 1999 at 15:17:12
Using Mozilla/2.0 (compatible; MSIE 3.02; Update a; Windows 95):

In Reply to: Re: Speaker plugs and wall mounts posted by James Cartwright on May 17, 1999 at 14:32:00:

The terminator material should match the speaker posts - gold (or gold plated) for gold, silver for silver etc. If you are going from copper wire to a ferrous connection (silver or chrome colour) then brass or rhodium are good transition metals. If you are planning for the future, I'd recommend rhodium for humid areas and gold otherwise.

When making the connections, use compression connectors which should be properly crimped using hydraulic tools (ask your dealer about their equipment or any industrial rental place will have these if you know what you're doing). Finally, tape the connections up - this helps keep condensation out and reduces corrosion.

Follow Ups:

• Re: Speaker plugs and wall mounts - Chris Jensen 16:56:31 05/17/99 (0)

Return to the new SMR Forums Menu

Design & HTML © SMR Home Theatre, Images © SMR Home Theatre cannot be reproduced without permission.  The images on this page are digitally watermarked.  New forum messages should be posted into SMR Forums v2 - http://www.smr-forums.com/

	The Web   SMR Archive