sub wiring, HT hookup

Posted by oversteer [IP: 209.186.12.2] on January 07, 1999 at 23:30:33:

In Reply to: sub wiring, HT hookup posted by adam on January 07, 1999 at 22:41:25:

I have a Yamaha 2092 and if Yamaha is consistent, with the speakers set to "small", the rolloff starts at 90hz. Since the Yamaha is doing the freq cut, you may just want to turn the KSW-200 up to the highest frequency possible and let the Yamaha do the work. Also, I have found on my 2092 that I get a better sound when I set the LFE to "Both" and leave the main speaker settings on "Large". Only you know what sounds best with your setup though so just play around with it.

: I used to have my klipsch KSW-200 sub connected to the main terms, with monster cable orig. 12 gauge, high passed to sats. Now, I use a monster 18 feet Junior Interlink RCA cable into the "sub" single input in sub. I want to know if this is the same sound as before, and also i set my mains for small on my yamaha R-V1103 receiver, and i would like to know where it cuts the bass off so i can set my sub accordingly. any input appreciated.

Follow Ups:

• sub wiring, HT hookup - Roy Miu 09:44:08 01/08/99 (1)
  • sub wiring, HT hookup - oversteer 22:10:19 01/08/99 (0)

Return to the new SMR Forums Menu

Design & HTML © SMR Home Theatre, Images © SMR Home Theatre cannot be reproduced without permission.  The images on this page are digitally watermarked.  New forum messages should be posted into SMR Forums v2 - http://www.smr-forums.com/

	The Web   SMR Archive