How to hook up a subwoofer?

Posted by GDS [IP: 135.90.253.90] on January 11, 1999 at 16:35:13:

In Reply to: How to hook up a subwoofer? posted by Nigel Pond [SysOp] on January 11, 1999 at 12:34:52

: Tom

: : Anyways there is 2 subwoofer outputs on my ES50. Do I hook up both of them or just one is enough??

: That depends! Are the sub outputs on the ES50 left and right sub outputs, or just double, mono, LFE outputs?

: If the former, then connect up both left and right, if the latter, then just connect one of them to your sub. Your sub's handbook should tell you which connector to use on the sub for mono use - usually it's the left.

USE A Y-cable to utilize both inputs of your sub. If you dont use both, you may loose about 6 dB of signal and thus will not be able to achieve max power of sub.

Follow Ups:

• How to hook up a subwoofer? - Nigel Pond [SysOp] 17:24:55 01/11/99 (0)

Return to the new SMR Forums Menu

Design & HTML © SMR Home Theatre, Images © SMR Home Theatre cannot be reproduced without permission.  The images on this page are digitally watermarked.  New forum messages should be posted into SMR Forums v2 - http://www.smr-forums.com/

	The Web   SMR Archive