Cable connection

Posted by SMR [WizOp] [IP: 212.211.25.46] on November 02, 1998 at 20:30:26:

In Reply to: Cable connection posted by Joe on November 02, 1998 at 16:36:27:

Joe,

: Should I use a normal interconnect cable or digital coaxial cable to connect the RF output of a AC3 laserdisk player to the demodulator?

Dolby Digital RF should be carried in the same way most other radio frequencies are, by shielded 75ohm coaxial cable. In fact, Dolby Digital RF can be invasive so keep the links as short as possible and double-shielded cable wouldn't hurt.

It just so happens that "digital" interconnect cables meet all these requirements, so yes, that's what you should be using, not standard line-level interconnects.

Stuart.

Follow Ups:

Return to the new SMR Forums Menu

Design & HTML © SMR Home Theatre, Images © SMR Home Theatre cannot be reproduced without permission.  The images on this page are digitally watermarked.  New forum messages should be posted into SMR Forums v2 - http://www.smr-forums.com/

	The Web   SMR Archive