Martin Logans, Velodyne and current

Posted by Joel [IP: 199.107.32.222] on April 02, 1999 at 13:04:16
Using Mozilla/4.0 (compatible; MSIE 4.01; Windows 95):

In Reply to: Martin Logans, Velodyne and current posted by Bruce McDermott on March 29, 1999 at 22:14:30:

I have a very similar setup - ML reQuests and Logos across the front, HGS-12 sub, an ATI 1504 amp driving the 4 surrounds, Krell KAV-500 (125x3) driving the front 3 channels, plus an Aragon 4004 Mk. II driving my second zone. All on a single circuit.

Now, every house is different, I am no electrician, no guarantees and YMMV, but I have noticed no problems, even when the whole show is going at once. I don't know how hard you're going to drive things, but it seems to me that the issue, if any, is likely to arise during LFE transients, which by their very nature, are pretty loud and you probably would not notice any transient voltage sag.

I certainly have not noticed anything, other than a hum issue from the ATI amp that ultimately required a ground lift.

Good luck!

Follow Ups:

Return to the new SMR Forums Menu

Design & HTML © SMR Home Theatre, Images © SMR Home Theatre cannot be reproduced without permission.  The images on this page are digitally watermarked.  New forum messages should be posted into SMR Forums v2 - http://www.smr-forums.com/

	The Web   SMR Archive