Sub Connection

Posted by Brad Broten [IP: 209.82.120.19] on June 28, 1999 at 14:02:50
Using Mozilla/2.0 (compatible; MSIE 3.02; Update a; Windows 95):

In Reply to: Sub Connection posted by andrei on June 27, 1999 at 10:49:36:

I think the ideal situation is to have a very-low-frequency capable subwoofer connected to the LFE output, and have full-range speakers on the mains. This may require you to use higher frequency but faster subs for the mains (which are connected to the high-pass filters on these subs) if your mains aren't capable of reasonably low frequencies.

BTW, I think the A-1 only redirects the < 90Hz if you select Small in the setup.

I don't think you would want to re-introduce any signals from the LFE pre-out to your mains, so I'd say a big NO to your second question. If you have no Sub, the A-1 should be able to re-route the LFE to your main speakers. Do this instead.

Follow Ups:

Return to the new SMR Forums Menu

Design & HTML © SMR Home Theatre, Images © SMR Home Theatre cannot be reproduced without permission.  The images on this page are digitally watermarked.  New forum messages should be posted into SMR Forums v2 - http://www.smr-forums.com/

	The Web   SMR Archive