Frequency cutoff for large/small speakers?

Posted by Ray Gralak [IP: 207.124.221.15] on October 30, 1998 at 16:32:59:

In Reply to: Frequency cutoff for large/small speakers? posted by Phil Miller on October 30, 1998 at 15:35:45:

Hi Phil. Thanks for the welcome!

I forgot to mention that I'm using an M&K MX-200 sub. I'll try what you suggested and see if it makes a difference. However, I'm using one of the CinePro amps (3K6) for the LRC and
sides, using the 6th channel to biamp the center, so I really have enough power in my smallish room (14'x17') to drive the Aerials to insane levels without straining, bass included. I was just worrying if it was possible to damage my speakers. It just seems like such a waste to me to lose the 55-80 Hz in my mains and surrounds.

I hope that any future bass management controls will allow for lower cutoff frequencies. Even better, it would be nice to be able to specify the cutoff frquency in hertz for each channel individually, then direct the rest of the bass to the sub.

-Ray

Follow Ups:

Return to the new SMR Forums Menu

Design & HTML © SMR Home Theatre, Images © SMR Home Theatre cannot be reproduced without permission.  The images on this page are digitally watermarked.  New forum messages should be posted into SMR Forums v2 - http://www.smr-forums.com/

	The Web   SMR Archive