Subwoofer levels: How do you do it?

Posted by Donald Bennett [IP: 207.231.93.94] on November 28, 1998 at 12:18:23:

In Reply to: Subwoofer levels: How do you do it? posted by Mark Giovannetti on November 28, 1998 at 07:29:19:

Mark,

I recommend that you set the DC-1 for 0dB on the sub setup menu and adjust the gain control on the sub to match the volume level of your other speakers. This way you maximize the adjustment range of the DC-1 sub output control.

If the sub can't adjust for the proper level then you need to try and adjust with the DC-1 also. If the sub can't be adjusted low enough then consider an external attenuator (voltage divider). Hopefully the sub won't be to low to match your other speakers.

Don

Follow Ups:

Return to the new SMR Forums Menu

Design & HTML © SMR Home Theatre, Images © SMR Home Theatre cannot be reproduced without permission.  The images on this page are digitally watermarked.  New forum messages should be posted into SMR Forums v2 - http://www.smr-forums.com/

	The Web   SMR Archive