Static/crackles on some DC-1 inputs

Posted by Bart LoPiccolo, Lexicon [IP: 208.26.117.2] on February 05, 1999 at 10:49:05
Using Mozilla/4.05 [en] (Win95; I):

In Reply to: Static/crackles on some DC-1 inputs posted by Andrew Krieg on February 04, 1999 at 22:31:48:

Andrew,

The only thing I can think of is you may have set the gain setting in the Input Configuration menu to Manual, and raised the gain to levels that are high enough to overdrive the inputs. The input gain can not be adjusted for digital sources, so they would not have the same problem. Beyond that, I would have to direct you to my service department. Check the input configuration, and make sure the gain is set to Automatic. If this is not the issue, let em know and we'll go from there.

Bart LoPiccolo
Lexicon

Follow Ups:

Return to the new SMR Forums Menu

Design & HTML © SMR Home Theatre, Images © SMR Home Theatre cannot be reproduced without permission.  The images on this page are digitally watermarked.  New forum messages should be posted into SMR Forums v2 - http://www.smr-forums.com/

	The Web   SMR Archive