DC1/PROCEED REMOTE TRIGGER

Posted by BRUCE [IP: 205.188.193.161] on May 25, 1999 at 08:29:34
Using Mozilla/4.0 (compatible; MSIE 4.01; AOL 4.0; Windows 95):

I have been trying to hook up my DC1 remote trigger to my Proceed amp2 and amp3. I mad a 5 pin din plug according to the diagram in the manual and made a spliced cable with 1/8" mini plug according to the proceed manual. I checked continuity. Plugged them in and got nothing. After talking with Lexicon several times, I was told that the problem is that the DC1 is putting out a constant 12V signal, but the proceed wants to see a millivolt pulse signal. Lexicon is telling me that they are not compatible. Has anyone else gotten this to work?

Follow Ups:

• DC1/PROCEED REMOTE TRIGGER - Jim Varrone 17:06:34 05/25/99 (0)

Return to the new SMR Forums Menu

Design & HTML © SMR Home Theatre, Images © SMR Home Theatre cannot be reproduced without permission.  The images on this page are digitally watermarked.  New forum messages should be posted into SMR Forums v2 - http://www.smr-forums.com/

	The Web   SMR Archive