Speaker Setup

Posted by Ron H [IP: 216.119.138.157] on June 30, 1999 at 18:47:06
Using Mozilla/4.0 (compatible; MSIE 5.0; MSN 2.6; Windows 95; DigExt):

I have a pair of B&W 803s for my right/left speakers and a Sunfire Signature sub for the LFE hooked up to my MC-1. Should I run the 803s full range or cut them off at 40hz and let the sub pick up the rest?

The sub does not have a bypass setting for its crossover. Should I set the MC-1 sub x-over at off and set the sub crossover at 40hz or should I turn the sub crossover all the way up and then set the crossover on the MC-1 to 40hz?

Ron H

Follow Ups:

• Speaker Setup - Philip Brandes 19:09:48 06/30/99 (2)
  • Speaker Setup - Ron H 19:34:19 06/30/99 (0)
  • Speaker Setup - Ron H 19:32:22 06/30/99 (0)

Return to the new SMR Forums Menu

Design & HTML © SMR Home Theatre, Images © SMR Home Theatre cannot be reproduced without permission.  The images on this page are digitally watermarked.  New forum messages should be posted into SMR Forums v2 - http://www.smr-forums.com/

	The Web   SMR Archive