24/96 inputs on MC-1

Posted by Robert Bienstock [IP: 208.250.141.137] on July 12, 1999 at 17:05:00
Using Mozilla/4.0 (compatible; MSIE 5.0; Windows 98):

In Reply to: 24/96 inputs on MC-1 posted by Hai Ng on July 12, 1999 at 16:52:57:

:Only thing I miss on the 919 is that there is no jog and shuttle on the control and I can't figure out how to get my Pronto to learn the IR command to go slow-mo (composite time-delayed IR transmission it seems).

So the jog/shuttle is on the unit or doesn't it have one? Pioneer is notorious for having dificult to learn IR commands. Most Pioneer remotes have an output frequency that is too high for the Pronto to learn. Fortunately, there are 3 workarounds: (1) teach the Pioneer remote commands to a different remote and then use that remote to teach the Pronto (this almost always works), (2) get an older Pioneer remote that uses the old low frequency commands (that also always work with all Pioneer units), or (3) check out the databases at remotecentral.com or prontoedit.com as there will almost certainly be a working CCF file for your player there for download.

Follow Ups:

• 24/96 inputs on MC-1 - Hai Ng 17:29:59 07/14/99 (0)

Return to the new SMR Forums Menu

Design & HTML © SMR Home Theatre, Images © SMR Home Theatre cannot be reproduced without permission.  The images on this page are digitally watermarked.  New forum messages should be posted into SMR Forums v2 - http://www.smr-forums.com/

	The Web   SMR Archive