24/96 inputs on MC-1

Posted by Hai Ng [IP: 209.223.197.218] on July 14, 1999 at 17:29:59
Using Mozilla/4.5 (Macintosh; I; PPC):

In Reply to: 24/96 inputs on MC-1 posted by Robert Bienstock on July 12, 1999 at 17:05:00:

:So the jog/shuttle is on the unit or doesn't it have one?

It doesn't have one. The CLV-91 Elite model does.

:Pioneer is notorious for having dificult to learn IR commands. Most Pioneer remotes have an output frequency that is too high for the Pronto to learn.

Well, for this particular one, I think that the button actually emits two different signals, one on initial click and the other after a short delay. Unfortunately, I have not been able to time that delay and the Pronto accepts the key after the first signal.

I'll try your plan with my SL-9000 and a Pioneer learning remote and see if it is just frequency. Thanks!

-
nghai

Follow Ups:

Return to the new SMR Forums Menu

Design & HTML © SMR Home Theatre, Images © SMR Home Theatre cannot be reproduced without permission.  The images on this page are digitally watermarked.  New forum messages should be posted into SMR Forums v2 - http://www.smr-forums.com/

	The Web   SMR Archive