Bare Wire Trigger

Posted by Bruce Cassell [IP: 152.163.204.72] on July 27, 1999 at 21:51:37
Using Mozilla/4.0 (compatible; MSIE 4.01; AOL 4.0; Windows 98):

In Reply to: Bare Wire Trigger posted by Doug Wells on July 27, 1999 at 20:45:08:

Doug, I'm not sure if the MC1 is the same as the DC1 but if so you will need to get an adaptor to convert the constant 12V output of the Lex to a pulse. I also have proceed amps and have had no luck in setting this up. I talked with both Lex and madrigal about this and the fellow at madrigal told me that Niles makes an adaptor. So far my lex dealer (who is also a niles dealer )has not confirmed this. I'm still trying to get it confirmed that they make this and get it ordered. Maybe your dealer will succeed better than mine. If so, let me know the model # etc. Hope this helps.

Bruce

Follow Ups:

Return to the new SMR Forums Menu

Design & HTML © SMR Home Theatre, Images © SMR Home Theatre cannot be reproduced without permission.  The images on this page are digitally watermarked.  New forum messages should be posted into SMR Forums v2 - http://www.smr-forums.com/

	The Web   SMR Archive