AVIA and DC-1

Posted by Philip Brandes [IP: 24.8.188.112] on October 23, 1999 at 06:36:15
Using Mozilla/4.0 (compatible; MSIE 4.5; Mac_PowerPC):

In Reply to: AVIA and DC-1 posted by Bill Bunker on October 23, 1999 at 02:53:25:

: I seem to remember Philip suggesting temporarily plugging the side amps into the front outputs for this purpose. Is that right?

That was only when you are trying to integrate side subwoofers with separate side speakers. If you are trying to separately adjust the woofers in your speakers relative to their mid-tweets, don't. The speaker designer has already done that.

As you gave discovered neither the Avia disc nor any other source is discrete 7.1, so it will not have separate signals for sides then rears. You should calibrate your system using the Lexicon internal test tones.

Cheers,
Philip Brandes

Follow Ups:

• AVIA and DC-1 - Dylan 09:57:27 10/24/99 (0)
• AVIA and DC-1 - Bill Bunker 16:24:06 10/23/99 (2)
  • AVIA and DC-1 - Philip Brandes 16:35:21 10/23/99 (1)
    • AVIA and DC-1 - Bill Bunker 01:30:22 10/25/99 (0)

Return to the new SMR Forums Menu

Design & HTML © SMR Home Theatre, Images © SMR Home Theatre cannot be reproduced without permission.  The images on this page are digitally watermarked.  New forum messages should be posted into SMR Forums v2 - http://www.smr-forums.com/

	The Web   SMR Archive