![]() |
![]() |
![]() |
|||
![]() ![]() |
Bass Enhance Testing
Posted by Bruce Cassell [IP: 152.163.201.194] on August 28, 1999 at 01:21:49 I thought I'd jump back into the discussion on BE. In a thread a while back I was investigating the effects and advantages to BE and what equipment might work best for my system and speakers. It took a while but I found a pair of REL Strata II's (sorry Phillip) to mate with my Aerial SR3's. (Fronts are Aerial 10T's, CC3 for center with Aerial 5's for the rear. Proceed Amp 2's and Amp 3, Lex DC1DTSV3, Muse Model 18 sub for .1 channel). I chose the Strata's for their flexible hookup, size(12Dx20Hx16W), great sound, and because I like the way they interface with the satellite speakers. The SR3's are great sounding dipole/bipole speakers that go down to 50 Hz on their own. I used BE for awhile without subs, which gave me a good taste for the improvements possible with full range sides. The REL's are hooked up via the amplifier taps. This is very convenient because I can just drop the cable inside the wall down from the side speakers to the sub. Nice and neat. The side speakers are hooked up to speaker cable run inside the wall, so I can tap into those posts for the REL hookup. This means that the Aerial and the sub get a full range signal, then you just adjust the sub's crossover to blend the speakers. Works great. Once adjusted the subs and the SR3's blend beautifully. Use a test disc like S'phile #2 and run the tests just as Phillip as suggested in a previous post. Bruce
Follow Ups:
Return to the new SMR Forums Menu
|
|
|||
![]() © SMR Group 2001-2004 - http://www.smr-group.co.uk/ |
|||||