PC line out to receiver...

[ Follow-ups ] [ Post Follow-up ] [ SMR Forum 4 - Surround Receivers, Processors and Amplifiers Archive 1 ] [ FAQ ]

Posted by wk [IP: 208.139.124.22] on November 09, 1998 at 21:42:49:

In Reply to: PC line out to receiver... posted by Tom K. on November 08, 1998 at 01:49:25:

: Is there any way of connecting a line out of a sound card (in my case an AWE 32) to my home theater system without getting that constant, annoying low feedback noise? I have tried connecting it to an Aux, a VCR in, a CD in, messed with the volume settings on the cards, the input levels on the receiver, all to no avail.

: I am trying to connect it to a Denon AVR-5600. Any help would be appreciated.

: Tom K.

: I have good PC speakers, I am merely experimenting...

Tom

Steve was right - there shouldn't be any difference in which input you use. I also connect the output of my AWE64 to external amps with pretty good results. I think you should first make sure your receiver is connected to the line out, NOT speaker out of your sound card. You can also move your sound card to another slot, probably the slot furthest away from the power supply to see if that helps. The hum might be interference from the PC's power supply.

Follow Ups:

Return to the new SMR Forums Menu

Design & HTML © SMR Home Theatre, Images © SMR Home Theatre cannot be reproduced without permission.  The images on this page are digitally watermarked.  New forum messages should be posted into SMR Forums v2 - http://www.smr-forums.com/

	The Web   SMR Archive