VCD's and ProLogic Question?
Posted by Chris Keesee [IP: 166.72.252.88] on December 31, 1998 at 09:11:56:
In Reply to: VCD's and ProLogic Question? posted by Mark on December 29, 1998 at 19:57:20:
Hi Mark
Dolby Pro Logic is phase-encoded into the standard 2 channel stereo output signals.
The stereo output (analog) from your CD-ROM will contain the DPL matrix information. Running it through your soundcard and then out to your DPL decoder (receiver, I assume) should work. If you can set your soundcard to allow passage of the signal straight thru (no preamp effects - volume, tone, etc), your decode results will be better. The more the signal is altered through level changes, distortion, eq, etc, the less likely a solid decode will occur.
Follow Ups:
Return to the new SMR Forums Menu
Design
& HTML © SMR Home Theatre, Images © SMR Home Theatre cannot be reproduced without
permission. The images on this page are digitally watermarked. New forum
messages should be posted into SMR Forums v2 - http://www.smr-forums.com/
|
