EQUAL POWER!!!!!
Posted by Dave Korsunsky [IP: 216.13.64.254] on May 31, 1999 at 10:30:41
Using Mozilla/4.0 (compatible; MSIE 4.01; Windows NT):
In Reply to: EQUAL POWER!!!!! posted by Bob Walters on May 29, 1999 at 21:27:49:
Bob:
A general rule of thumb with amplifiers is that you need to double output power to obtain a noticeable (3DB) increase in volume. Thus with your 40w rear channels you would need to double the output to 80w/channel to obtain the 3DB increase you are looking for. An easy way to do this is with the addition of a 40wx2 power amplifier. (preferrably from the same manufacturer as your receiver, but not imperative). I'd suggest checking local A/V shops or check manufacturer websites such as Yamaha, Denon etc. and see if you can find an appropriate amplifier. Hope this helps,
Dave.
Follow Ups:
Return to the new SMR Forums Menu
Design
& HTML © SMR Home Theatre, Images © SMR Home Theatre cannot be reproduced without
permission. The images on this page are digitally watermarked. New forum
messages should be posted into SMR Forums v2 - http://www.smr-forums.com/
|
