"Matrix" mastering problem?

Posted by Ken Lasko [IP: 142.106.94.60] on October 04, 1999 at 13:59:38
Using Mozilla/4.0 (compatible; MSIE 5.0; Windows NT; DigExt):

In Reply to: posted by Tim S. on September 22, 1999 at 14:02:53:

Are you talking about when they are showing you how the camera point-of-view moved around the room, or are you talking about the whole sequence? If you are just talking about the in-progress look at the bullet time sequence then what you are seeing is completely normal. The whole point was to show you how the scene progressed from conception to reality. Since there are only a limited number of cameras situated around the room, computers were used to "fill in the blanks". The in-progress view shows the scene before the blanks were filled in (thus the 'flickering')

: It's not the green that bothers me, it's the "FLICKERING". It's EXTREMELY BAD. It only happens in 2 spots. These logos have it and the green room that is showing the camera array for the bullet shot. That green room can be accessed by selecting "ENTER" on the the Red pill in the features. I've read alot of posts talking about the green. None mentioned this very irritating flickering. Others have commented on these pressings to be filled with flaws and bugs. Looks like Circuit City in now selling these supposed pressings. I will exchange and comment later on my newly exchanged pressing.

Follow Ups:

• "Matrix" mastering problem? - Tim S. 15:04:01 10/06/99 (2)
  • "Matrix" mastering problem? - Martin Conley 13:26:56 10/14/99 (0)
  • "Matrix" mastering problem? - Nigel Pond [SysOp] 15:49:59 10/06/99 (0)

Return to the new SMR Forums Menu

Design & HTML © SMR Home Theatre, Images © SMR Home Theatre cannot be reproduced without permission.  The images on this page are digitally watermarked.  New forum messages should be posted into SMR Forums v2 - http://www.smr-forums.com/

	The Web   SMR Archive