S-VHS Y-adapter

Posted by Donald Bennett [IP: 207.231.93.171] on February 28, 1999 at 14:20:28
Using Mozilla/4.0 (compatible; MSIE 4.01; Windows 95):

In Reply to: S-VHS Y-adapter posted by Nick Lanting on February 28, 1999 at 12:41:53:

Nick,

You should not use a Y adapter with either S-Video or Composite signals. They are 75 Ohm and need to be properly terminated for proper operation.

My doubler takes composite, S-Video and component and outputs RGBHV to my projector and one could use the S-Video or composite outputs or loop through outputs to go to a normal TV.

You may be able to use the record outputs (VCR1 or VCR2) to feed your TV and the monitor out to feed the projector. You would just have to put the processor in a mode that would send the signal to the TV when needed.

Hope this helps, Don

Follow Ups:

• S-VHS Y-adapter - Allan 06:51:46 03/02/99 (0)
• S-VHS Y-adapter - Nick Lanting 15:42:04 02/28/99 (2)
  • S-VHS Y-adapter - Donald Bennett 19:12:05 02/28/99 (1)
    • S-VHS Y-adapter - Nick Lanting 11:44:54 03/01/99 (0)

Return to the new SMR Forums Menu

Design & HTML © SMR Home Theatre, Images © SMR Home Theatre cannot be reproduced without permission.  The images on this page are digitally watermarked.  New forum messages should be posted into SMR Forums v2 - http://www.smr-forums.com/

	The Web   SMR Archive