Pioneer DV-414 and Sony 9000es

Posted by Bryan P. [IP: 152.163.201.61] on January 29, 1999 at 23:26:08:

In Reply to: Pioneer DV-414 and Sony 9000es posted by Tim S. on January 29, 1999 at 10:37:34:

That's interesting. Especially since I spoke with Theta and they confirmed what I said. Since they also have a special connection for their own equipment, he may have been speaking about that but it certainly was not the impression I got.

I was told that the DVD audio digital outs will have to comply with the downconversion. However, the DVD digital outputs when playing a DAD in the player will pass the 96KHz signal.

Where do you see this in the manual? I am looking at mine on page 30. It says you MAY set it to 48KHz if you wish. It also states that SOME 96KHz DVDs are copy protected. These will provide NO output from the digital outputs. It also states that you should "set the output to 96 KHz for connection to an AV amplifier compatible with 96KHz linear PCM." 48KHz is the factory default setting as denoted by the "*" but it also clearly shows that you can set it to 96.

Unless my manual, the dealer, and Theta are all wrong, I should be able to pass the full 96KHz signal to the preamp for decoding.

Follow Ups:

• Pioneer DV-414 and Sony 9000es - Tim S. 02:19:21 01/30/99 (1)
  • Pioneer DV-414 and Sony 9000es - Bryan P. 01:05:11 01/31/99 (0)
• Pioneer DV-414 and Sony 9000es - Tim S. 02:06:33 01/30/99 (0)

Return to the new SMR Forums Menu

Design & HTML © SMR Home Theatre, Images © SMR Home Theatre cannot be reproduced without permission.  The images on this page are digitally watermarked.  New forum messages should be posted into SMR Forums v2 - http://www.smr-forums.com/

	The Web   SMR Archive