DSS for multiple TVs

Posted by Leo Duran [IP: 206.189.200.8] on June 25, 1999 at 12:03:54
Using Mozilla/4.08 [en] (WinNT; I ;Nav):

In Reply to: DSS for multiple TVs posted by rickster on June 25, 1999 at 09:09:45:

1) Be sure to get a dual-LNB type dish.
2) Then, hook-up both feeds fom the dual-LNB into a "Voltage Switch", such as the Sony EAC-DV1, which gives you four outputs.
3) The "switch" also accepts an input from a local antenna, and mixes that signal along with the DSS signal at each of thew four outputs. If you do that, you'll also need to use a "Diplexer", such as the Sony EAC-DD1, at the end of each of the ouputs, to split the DSS signal which goes to the DSS receiver and the antenna signal which to the RF input on your TV set.

Check the link at:
http://www.sel.sony.com/SEL/consumer/ss5/generic/digitalsatellitesystems/accessories/index.shtml

Follow Ups:

• DSS for multiple TVs - bill 00:22:59 06/26/99 (2)
  • DSS for multiple TVs - Leo Duran 10:18:38 06/28/99 (0)
  • DSS for multiple TVs - WaxDonuts 13:24:57 06/26/99 (0)

Return to the new SMR Forums Menu

Design & HTML © SMR Home Theatre, Images © SMR Home Theatre cannot be reproduced without permission.  The images on this page are digitally watermarked.  New forum messages should be posted into SMR Forums v2 - http://www.smr-forums.com/

	The Web   SMR Archive