Toshiba TW40H80 question

Posted by Leo Vildosola [IP: 192.197.118.240] on May 28, 1999 at 19:28:26
Using Mozilla/4.0 (compatible; MSIE 4.01; Windows 98):

In Reply to: Toshiba TW40H80 question posted by Antony on May 28, 1999 at 16:43:01:

Hi Antony,

1. a) When playing any anamorphic (enhanced for 16:9) DVD use Full mode. For non-anamorphic material use TheaterWide2.

1. b) For 4:3 material try using TheaterWide3. You will loose some information at the top and bottom but this is the best compromise.

2. This is a major flaw with the menu system of Toshiba and other manufacturers. Short of making the changes at the service level you will have to get out of the menu everytime you want to check your changes.

3. If the image is not uniform then it is a geometry problem. Again, this can only be fixed at the service level.

4. I don't know about the Bay Area but Bob McJimsey is out in California. Visit his site at http://www.tru-line.com. Bob is a pioneer in display calibrations and considered one of the best in the field.

Regards,

Leo

• HTCal - Home Theater Calibrations

Follow Ups:

Return to the new SMR Forums Menu

Design & HTML © SMR Home Theatre, Images © SMR Home Theatre cannot be reproduced without permission.  The images on this page are digitally watermarked.  New forum messages should be posted into SMR Forums v2 - http://www.smr-forums.com/

	The Web   SMR Archive